This website uses cookies to manage authentication, navigation, and other functions. By using our website, you agree that we can place these types of cookies on your device.

Naval Group Refines the Design of its FTI / Belharra Next Generation Frigate
 .
FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 2
French shipbuilding group Naval Group (formerly known as DCNS) continues to flesh out the design of its Belharra frigate currently being developed for the French Navy (Marine Nationale). A new scale model of the FTI (frégate de taille intermédiaire or mid-size frigate) showcased during the Pacific 2017 naval defense event shows that Naval Group has been busy in the past year optimizing the design around the bridge area and the helicopter hangar, providing a much improved look to the next generation surface combatant.
 
a
Focus - FTI / Belharra
 
 
 
Naval Group Refines the Design of its FTI / Belharra Next Generation Frigate
 
By Xavier Vavasseur - Editor in Chief
French shipbuilding group Naval Group (formerly known as DCNS) continues to flesh out the design of its Belharra frigate currently being developed for the French Navy (Marine Nationale). A new scale model of the FTI (frégate de taille intermédiaire or mid-size frigate) showcased during the Pacific 2017 naval defense event shows that Naval Group has been busy in the past year optimizing the design around the bridge area and the helicopter hangar, providing a much improved look to the next generation surface combatant.
     
FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 1The Belharra scale model showcased by Naval Group at Pacific 2017 in Australia features several design improvements compared to the original design unveiled one year ago at Euronaval 2016.
     
Unveiled at Euronaval 2016 by Naval Group and the French MoD, the FTI is currently being developed for the French Navy (five frigates have been ordered) as well as to answer the needs of 21st century navies.

As Navy Recognition was reporting during our coverage of Euronaval 2016: "Until the programme reaches critical design review, many things may still evolve and the FTI scale model we will see at Euronaval 2018 may look slightly different compared to the one unveiled last week as the design gets fine tuned. [...] The area around the bridge of the FTI may still evolve. Our understanding is that it looks the way it is right now mainly because of a requirement to fit a Narwhal remote weapon station just forward of the bridge (with another one on top of the helicopter hangar for 360° coverage).

And the bridge is certainly the area that changed the most in the FTI design.
     
FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 2FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 3Detailed view of the FTI (export configuration) bridge area at Pacific 2017 (top) compared to the bridge area at Euronaval 2016 for the FTI design unveiling. Note that the "hull mounted sonar" has been moved as well and is now a "bow sonar".
     
Improvements around the bridge are many:
- The bridge wings have evolved significantly. Limited to the forward area of the bridge on the 2016 design, they have been enlarged and run along the sides of the bridge area on the 2017 design.
- The kind of storage area right in front of the bridge, present on the 2016 design, is gone, giving a much more polished look.
- The bridge itself is not so flat anymore: The linear row of windows has been truncated on each side, giving it a less perpendicular aspect.

Above the bridge, the integration of the integrated mast, fire control and satellite link antennas has been improved as well: The two Syracuse military SATCOM antennas which used to be on each side of the SEA FIRE mast have been moved forward (directly on top of the bridge) and aft, on top of the helicopter hangar. The fire control is now placed on a "stealthy" base. The area surrounding the base of the mast has been cleared up and is not smoother. Finally, the wall directly below the bridge is more slanted now (it used to be very vertical, almost at a 90° angle) and the hatch to access the forward deck has been modified as well.

Talking to Navy Recognition, a Naval Group frigate expert explained that the goal for all these design modifications was to improve, first, the radar cross section (RCS) of the FTI, as well as its exterior looks: "Design is quite important too for some customers".

We, at Navy Recognition, find the end result quite convincing: The FTI is now sleeker and sharper thanks to the latest design improvements.

The bow now features a small spray rail (to deflect the bow wave downward and reduce spray). During recent tank tests, the model featured two of them. The bow also features some low observable anchor pockets (in a similar fashion to those aboard the LPD 17 San Antonio-class), again, improving the stealthiness of the ship.

Last but not least, the "hull mounted sonar" has been moved forward and is now a "bow sonar" (confirming our early report on the Thales Kingklip Mk2 sonar)
     
FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 4FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 5Detailed view of the FTI aft area at Pacific 2017 (top) compared to the aft area at Euronaval 2016 for the FTI design unveiling.
     
The aft of the frigate received some design improvements too:
The superstructure around the helicopter hangar has been redesigned extensively. While the Euronaval 2016 model sported a trapezoidal shape, the latest design features an "X" shape. This superstructure design is a first on a Naval Group (DCNS) ship but is somewhat similar to some of the existing MEKO Frigates (with the sides of the superstructure going inward).
     
FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 6FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 7FTI (in export configuration, with 32x VLS) at Pacific 2017 (top) compared to the Belharra as unveiled by DCNS at Euronaval 2016.
     
While this summer, the French Navy and procurement agency (DGA) were still comparing and testing FTIs in two configurations: Inverted bow design (à la DDG 1000 Zumwalt) and a more conventional bow design, it seems that the inverted bow design has finally been retained.

According to our information, the decoy launching system of the FTI will be the Sylena Mk2 by Lacroix: It appears that each FTI would be "fitted for" 4x launchers, but each ship would actually be "fitted with" 2x launchers. Depending on mission requirements and threats, a select number of frigate could deploy with the 4x launchers. It is our understanding that the French Navy already proceed in a similar way with the EW suites of the Lafayette class frigates: not all of them are fitted with jammers. Jammers are swapped between hull depending on operational schedule). This information may not be "set in stone" yet however.
     
FTI Belharra frigate Naval Group DCNS French Navy PACIFIC 2017 8FTI scale model at Euronaval 2016 on the French MoD stand.
     
About the FTI
The French Defence Ministry announced the attribution to DCNS (now Naval Group) of a contract for the development and construction of five FTI (Frégate de Taille Intermédiaire or mid-size frigate) surface combatant intended for the French Navy in April this year. The first of the five frigates from this DGA-managed programme should be delivered in 2023 with an entry into active duty in 2025.

The FTI will have a displacement of about 4200 tonnes with a crew of 125 sailors. It will be capable of anti-submarine warfare, anti-air warfare, anti-surface warfare as well as the support of special forces missions.

The prime contractor is Naval Group while Thales is set to supply a number of brand new, next-gen systems:
- The CAPTAS-4 Compact sonar
- The SEA FIRE radar
- Aquilon integrated naval communication system
- The SENTINEL electronic warfare system

Safran Electronics & Defense will supply a new electro-optical FCS, the PASEO XLR.

Provisional configuration (to be confirmed):
76mm main gun
2x Narhwal 20mm remote guns
8x Exocet MM40 Blk III anti-ship missiles
2x Sylver A50 launchers for 16x Aster 30 missiles
Space for 2x extra Sylver A70 launchers
MU90 torpedoes
Hangar for one NH90 helicopter and one UAV
Fitted for 4x Sylena Mk2 decoy launchers but with 2x of them